Assembling The Miro H13 HEPA Filter– Part 3. Installing Miro H13 HEPA Filter

 Miro H13 HEPA Filter Assembly Step 3

Align the Filter to the Bottom Module and push it all the way down, after removing the packaging from the filter. If the filter is not properly aligned the top module will not attach itself properly. 

A diagram is located below highlighting the necessary steps needed for this process:Screen_Shot_2023-01-06_at_11.16.31_AM.png



Was this article helpful?
0 out of 0 found this helpful



Article is closed for comments.