Miro Humidifier Assembly– Part 3. Mist-maker Placement

 NR07 Series Miro Humidifier Assembly (NR07G and NR07S) step 3:

Begin by making sure that the grooves of the Mist-maker line up with the positioning of the "fins" in the bottom of the floating base. If the cable wire blocks the top of the Mist-maker, the humidifier will not produce any mist. Finally, treat the Mist-maker with care as the unit may get damaged if you pull on the cable or fan too hard.

Below is a diagram of the Mist-maker and its operating parts:Screen_Shot_2023-01-06_at_9.52.56_AM.png

Was this article helpful?
0 out of 0 found this helpful



Article is closed for comments.